Ironman 4×4, alongside most driving light manufacturers in the market, has been utilising traditional reflector cup technology for many years. Unfortunately, small and shallow reflector cups can be largely inefficient.

Our Deep Dish Reflector Cups are up to 100% deeper than traditional cups, offering great improvements in light efficiency. This middle row of LEDs provide great light output directly in your sight line for an optimal driving experience.

The Scope 9″ driving lights feature 4 high-powered LEDs running through the centre of the light. The light, from these LEDs, is captured by our Deep Dish Reflector Cups and projected out.

The 9″ Scope driving light can be dialled down at the touch of a button, cutting power by 80%.

With lights this powerful, sometimes you need to turn it down a bit. When approaching regional towns, reflective road signs increase in density and can be very distracting to a driver.

While still providing improvements over your vehicle’s stock high-beams, the power cut greatly improves the driving experience in these conditions.

To the sides, a pair of diffused optic lenses take the light from 8 LEDs and provide great vision to the immediate peripherals to the front of the vehicle.

Additionally, when the driving lights are not switched on, the side shooters can be activated as position lights coupled with the nicely illuminated branding at the top.

Heat is the biggest enemy to the performance of an LED, and therefore it’s critical to get heat away quickly.

The 9″ Scope driving light runs a minimal 10x 10-12W LEDs, which are directly mounted to the cast housing. Utilising the hugely efficient reflectors and less LEDs already generates less heat – coupled with clever mounting to the cast housing ensuring maximum performance and brightness over long periods.

Scope 9″ driving lights run a 5700 Kelvin colour rating – a colour most closely matched to that of daylight is easier on the eyes!

• IP68 protection against water and dust ingress
• Case Breather – allows hot air to escape to eliminate condensation and ensure a water-tight seal is maintained
• Case mounted LEDs – allow for fast heat dissipation, keeping the lights cool and LEDs bright
• Virtually indestructible polycarbonate lens
• Rust-preventing facia with no front facing screws to capture and hold moisture
• DuPont powder-coated cast aluminium housing with stainless steel mount system
• Centre and side pinning bolts for ultimate rigidity
• 3-year warranty

The Ironman 4×4 7” Scope driving light does away with traditional reflector cups, and instead adopts a Total Internal Reflection (TIR) optic lens.

While all other types of reflector experience some level of ‘spill’ and loss of lighting efficiency, the TIR lenses which run through the centre of these driving lights capture 100% of the LEDs output and uniquely projects it as required for the ultimate driving experience.

The lens in our Spot model ensures light is captured and projected directly in front of the vehicle for optimal vision straight ahead, while the Combo model utilises a row of TIR discs that bounce the light horizontally for a broad spread of light – great for bush driving!

To the sides, a pair of diffused optic lenses take the light from 4 LEDs and provide great vision to the immediate peripherals to the front of the vehicle.

Additionally, when the driving lights are not switched on, the side shooters can be activated as position lights coupled with the nicely illuminated branding at the top.

The 7” Scope driving lights, run a minimal 9-12 high performance LEDs, which are directly mounted to the cast housing. Utilising the hugely efficient reflectors and less LEDs already generates less heat – coupled with clever mounting to the cast housing ensures…

maximum performance and brightness over long periods.

Scope 7” driving lights run a 5700 Kelvin colour rating – a colour most closely matched to that of daylight is easier on the eyes!

Heat is the biggest enemy to the performance of an LED, and therefore it’s critical to get heat away quickly.

The 9″ Scope driving light runs a minimal 10x 10-12W LEDs, which are directly mounted to the cast housing. Utilising the hugely efficient reflectors and less LEDs already generates less heat – coupled with clever mounting to the cast housing ensuring maximum performance and brightness over long periods.

Scope 9″ driving lights run a 5700 Kelvin colour rating – a colour most closely matched to that of daylight is easier on the eyes!

Driving lights are about more than just sheer technical numbers. The optics of driving lights is where the real magic happens.

There are some very powerful lights out there, with harsh white light and sharp edges, which makes night driving tiring and quickly becomes more of a hindrance than an advantage.

Manufactured using die-cast aluminium housing, the Blast Phase II features a proven heat sink that pulls heat away from the light for maximum lifespan.

The Blast Phase II also features class-leading and German-engineered OSRAM LEDs, which offer a lifespan of 50,000 hours (That’s the equivalent of 2083 days or 5.7 years non-stop!).

Ironman 4×4 driving lights are installed to turn on and off with your high beams, while they can be independently switched off if you only want to use your 4×4’s standard high beams at any time.